PELCO^® 18 SEM Pin Mount Storage Holder and Box

Versatile, cost effective SEM pin mount storage box and holder for pin mounts with a ø3.2mm (1/8") pin. Numbered 1-18 with the spacing designed to accommodate all types of pin mounts with a diameter from 6.4 to 50mm. Can hold 18 of 12.7mm pin mounts, 8 of 18mm pin mounts, 8 of 25mm pin mounts, 2 of 32 or 38 or 50mm pin mounts with space left for the smaller pin mounts. Maximum specimen height between mount surface and closed lid is 16mm (5/8"). Used for FEI/Philips, ZEISS/LEO/Leica, Cambridge CamScan, TESCAN, Amray and ETEC SEMs. Box inside dimensions are: 4-5/8" x 2-2/4" x 1-5/16" (11.7 x 7.0 x 3.3cm).

PELCO^® X-TREME 18 SEM Pin Mount Storage Box with Holder

Very strong and rugged clear polycarbonate box to store standard pin mounts with 3.2mm (1/8"). This box is watertight, crushproof and dustproof. The strong hinges, locking clasps and soft silicone O-ring seal makes this an ideal transport, shipping and storage box for SEM samples on pin mounts. The holder insert is numbered 1-18 and accommodates all types of pin mounts from 6.4 to 50mm diameter. Same storage capacity as #16709.

Plastic Box with SEM Pin Mount Specimen Holder

"Standard" plastic box with pin stub specimen holder. For ø12.7mm (1/2") SEM pin mounts with ø3.2mm (1/8") pins. Box inside dimensions are: 2-7/8" x 1-3/16" x 3/4" (7.3 x 3 x 1.9cm).

Plastic Box with JEOL 12.2 and 12.5mm SEM Cylinder Mount Specimen Holder

Plastic Box for Tall Specimens
with SEM Pin Mount Specimen Holder

Plastic Box for Tall Specimens
with JEOL 12.2 and 12.5mm SEM Cylinder Mount Specimen Holder

"Tall" plastic box with specimen holder. Slip over retaining peg is included to keep holder in place if box is tipped or inverted. This box is ideal for JEOL 12.2mm cylinder mounts and will hold 12.5mm dia, mounts but 12.5 fit will be very tight.

Universal Specimen Holder with Tall Storage Box

Universal Specimen Holder with removable stand-off pin that keeps the holder in place if box is tipped or inverted in storage box.

• 2-sided use for double versatility
• accepts pin-type or cylinder mounts
• 12.7mm (1/2") pin stubs with ø3.2mm (1/8") pin - holds 12, either side (FEI/Philips, ZEISS/LEO/Leica, Cambridge, CamScan, TESCAN, Amray and ETEC SEM's.)
• ø9.5mm (3/8") - holds 12 on one side (JEOL)
• ø15mm mounts - holds 12 on one side (JEOL, ISI/ABT/Topcon)

PELCO^® 10 Hitachi SEM Mount Storage Holder and Box

Versatile storage box and holder for Hitachi SEM mounts with M4 threaded hole in the base. Tapered plastic posts allow easy storage and retrieval. Numbered 1 – 10 to accommodate Hitachi mounts from 15 to 32mm diameter. Can hold 10 of the 15mm mounts, 8 of the 25mm or 2 of the 32mm with enough space to place and remove the mounts. Maximum specimen height for 6mm high Hitachi SEM mounts is 15mm with closed lid. Box inside dimensions are: 4-5/8" x 2-2/4" x 1-5/16" (11.7 x 7.0 x 3.3cm)

Replaces the #16718 Storage Box

PELCO^® X-TREME 10 Hitachi SEM Mount Storage Box with Holder

Very strong and rugged clear polycarbonate box to store standard Hitachi SEM mounts with M4 threaded hole in the base. This box is watertight, crushproof and dustproof. The strong hinges, locking clasps and soft silicone O-ring seal makes this an ideal transport, shipping and storage box for SEM samples on pin mounts. The holder insert is numbered 1-10 and accommodates Hitachi SEM mounts from 15-32 mm diameter. Same storage capacity as #16791.

NEW PELCO^® 36 M4/Hitachi SEM Mount Stand

ideal for storage or preparation

This workstation for M4 SEM mounts is fully-adjustable and made of solid aluminum with stainless cap screws. It is useful either for storage and/or for specimen preparation of large numbers of mounts in an array of sizes. Captured M4-threaded bolts can be raised or lowered to accommodate a large variety of sizes of M4 mounts.

The mount stand can hold a maximum of 36 standard 15mm (0.58") M4-threaded mounts. For larger mounts that might hang over the edge of the stand, 18 of the 25mm (1") mounts will fit with the stand outside of the polystyrene box, or 9 when inside and 11 of the 32mm (1.26") mounts outside of the polystyrene box, or 6 mounts when inside. The mount stand by itself is compatible with all types/sizes of M4 mounts. 

The PELCO^® SEM Mount Stand can also be used for supporting M4/Hitachi-threaded mounts and SEM specimen holders when preparing large numbers of specimens.

Polystyrene storage box dimensions are 153 x 102 x 51mm (6 x 4 x 2").

Mount stand without polystyrene box is 150 x 95 x 21mm (5.9 x 3.75 x 0.83").

PELCO^® Vacuum Desiccator for Hitachi M4 Sample Mount

The PELCO^® Vacuum Desiccator for Hitachi M4 Sample Mounts holds either 5 of the 15mm diameter Hitachi M4 mounts or two of the 25mm diameter Hitachi M4 mounts. Storage under vacuum eliminates contamination or dust. Several lid options available allow for sample heights from 7mm for the standard lid to 30mm for the tallest. The use of durable, non-outgassing anodized aluminum for all metal components and Viton^® O-rings makes it suitable for pumping down to 10^-3 mbar. Capable of holding vacuum for many weeks. Metal vacuum valve with PTFE shaft seal. Use a small vacuum pump to evacuate. Vacuum connection for pump-down is a 1/4" (6.35mm) barb fitting.

The standard desiccator comes with a clear acrylic plastic lid suitable for samples up to 12mm tall. Quartz glass and anodized aluminum lids are available separately, for maximum cleanliness, visibility, and to allow for tall samples up to 30mm to be accommodated.

• Keeps samples and calibration standards contamination free
• Prevents oxidization of sensitive samples
• Holds Hitachi M4 mounts secure on M4 screw adapters
• Standard acrylic lid included, or optional quartz glass lids available
• Ideal for storing, transporting and shipping samples and calibration standards

Overall size without vacuum valve is ø76 x 35mm (3 x 1.4"). Cavity height is 13.7mm (0.54"). Optional quartz glass lids with 12mm, 22mm, and 30mm internal height. Quartz lids are sealed with Viton^® O-rings.

Also available for SEM Pin Mounts (#16179) or as a TEM Grid Vacuum Desiccator (#16178).

SEM Pin Mount Specimen Holder and Box

Specimen holder and box for storing up to 8 of ø12.7mm pin mounts (ø3.2mm - 1/8" pin), used in FEI/Philips, ZEISS/LEO/Leica, Cambridge, CamScan, TESCAN, Amray and ETEC SEM's. Inside box dimensions are: 4-1/2" x 1-3/4" x 1-1/8" (11.4 x 4.4 x 2.9cm).

18 SEM Pin Mount Specimen Holder and Box

Storage Box and Holder for 18 of 12.7mm dia. or 8 of ø25mm pin mounts (ø3.1mm - 1/8" pin). Numbered 1 - 18. Used for FEI/Philips, ZEISS/LEO/Leica, Cambridge, CamScan, TESCAN, Amray and ETEC SEM's. Inside box dimensions are: 4.67 x 2.95 x 1.22" (11.8 x 7.5 x 3.1cm).

Single Pin Mount Storage Tube and Mailer

tube for SEM specimen pin mounts

Pin mounts with the standard 3.2mm (1/8") pin diameter are protected and held securely in the base (cap) of the tube. Can be used for pin mounts up to 18mm diameter. Pin mounts are sold separately. Inside dimension of clear tube: ø21mm (0.83"), max sample height on stub is 20mm (0.79"). Outside dimensions are ø23mm (0.9") with a height of 52mm (2.05"). Clear tube is made of polystyrene, cap is made of low density polyethylene (LDPE). Sold in packs of 10.

Single Hitachi M4 Mount Storage Tube and Mailer

tube for SEM specimen Hitachi M4 mounts

A 15mm diameter, M4 threaded Hitachi mount can be protected and held securely in the cap (base) of the tube on a M4 screw.
Suitable for ø15mm Hitachi Mounts. Hitachi Mounts are sold separately. Inside dimension of clear tube: ø21mm (0.83"), max sample height on stub is 20mm (0.79"). Outside dimensions are ø23mm (0.9") with a height of 52mm (2.05"). Clear tube is made of polystyrene, cap is made of low density polyethylene (LDPE). Sold in packs of 10.

Large Single Pin Mount Storage Tube and Mailer

tube for large SEM specimen pin mounts

Large pin mounts with the standard 3.2mm (1/8") pin diameter are protected and held securely in the base (cap) of the tube. Can be used for pin mounts up to 38mm diameter. Pin mounts are sold separately. Inside dimension of clear tube: Ø39mm (1.53"), max sample height on stub is 30mm (1.18"). Outside dimensions are Ø40mm (1.57") with a height of 75mm (2.95"). Clear tube is made of polystyrene, cap is made of low density polyethylene (LDPE). Sold in packs of 10.

Large Single M4 Mount Storage Tube and Mailer

tube for large SEM specimen M4 mounts

Large Hitachi  mounts with M4 threaded hole are protected and held securely in the base (cap) of the tube. Can be used for mounts up to 38mm diameter. Hitachi M4 mounts are sold separately. Inside dimension of clear tube: Ø39mm (1.53"), max sample height on stub is 30mm (1.18"). Outside dimensions are Ø40mm (1.57") with a height of 75mm (2.95"). Clear tube is made of polystyrene, cap is made of low density polyethylene (LDPE). Sold in packs of 10.

PELCO^® SEM Pin Stub Vacuum Desiccator

NEW Desiccator Lid Options Available!

The durable and versatile PELCO^® SEM Pin Stub Vacuum Desiccator holds up to 12 standard ø12.7mm (1/2") pin stubs, or two ø25mm (1") stubs or a single stub up to ø50mm (2") in diameter. Ideal for use with the PELCO® Fortress FIB Holders to protect processed samples as storage under vacuum eliminates contamination from vapor or dust.

The desiccator comes with a standard acrylic cap, allowing for a maximum 12mm (3/8") specimen height. Quartz glass and aluminum construction lids are available separately, which can accommodate up to 30mm samples. All metal parts are made of durable, non-outgassing, anodized aluminum and the use of Viton^® O-rings makes the desiccator able to pump down to 10^-3 mbar and capable of holding vacuum for many weeks. The metal vacuum valve has a PTFE shaft seal. Use a small vacuum pump to evacuate. Vacuum connection for pump-down is a 1/4" (6.35mm) barb fitting.

• Keeps samples and calibration standards contamination free
• Prevents oxidization or contamination of sensitive samples
• Holds pin mounts secure with O-rings
• Optional quartz glass and aluminum caps available for maximum cleanliness
• Ideal for storing, transporting and shipping samples and calibration standards

Also available as a TEM Grid Vacuum Desiccator (#16178) or Vacuum Desiccator for Hitachi M4 Stubs (#16179-4).

SEM-STOR Paper Box Storage for Pin Mounts

inexpensive storage for scanning electron microscopy mounts

Fold-up insert which accepts 8 specimen mounts: ø12.7mm (1/2") head, ø3.2mm (1/8") pin. Shipped flat. 7cm long x 3.8cm wide x 3.5cm high (2-3/4" x 1-1/2" x 1-3/8"). Pin mounts are not included.

Small Dust Cover

Convenient for temporary benchtop storage of in-process samples. The clear cover is made of ABS plastic and the blue base is made of high impact polystyrene plastic. Shown with Multi Pin Stub Holder #15413 and various pin stubs, available separately

Dimensions:
Total height with lid on: 7.1cm (2.8")
Base diameter: 10.2cm (4")
Inner tray diameter: 8.1cm (3.2")

PELCO^® 40 SEM Pin Mount Stand

ideal for storage or preparation

This practical pin mount stand made out of clean solid aluminum is either useful for storage or specimen preparation of large numbers of pin mounts. The pin mount stand can hold 40 of the standard 12.7mm (1/2") pin mounts or 12 of the 25mm (1") mounts. The pin mount stand is compatible with all types of SEM pin mounts up to 100mm (4") diameter and with the pin mount type SEM specimen holders. Six of these pin mount stands fit on a shelf in a 12 x 12 x 12" desiccator creating a storage capacity of 240 standard pin mounts per shelf. Also very practical for storing pin mount type SEM specimen holders.

The PELCO^® Pin Mount Stand can also be used for supporting pin mounts and pin type SEM specimen holders when mounting specimen. Ideal when preparing large numbers of specimens. One corner of the pin mount stand has a notch to aid as a locator. Overall size is 137 x 89 x 16mm (5.39 x 3.5 x0.63").